­

Sour Gas Products

Maximator offers a complete line of high pressure valves, fittings, tubing, check valves and line filters, adapters and couplings for standard oil field service where H2S is present. All high pressure valves and fittings use the high pressure style connection.

Oil & Gas Products feature:



High Pressure Valves for Sour Gas Applications

High Pressure Valves for Sour Gas Applications 30000 psi, 2070 bar, 2-way straight valves, 2-way Angle valvesMaximator Sour Gas Valves are designed for oil and gas service where H2S is present and available rated to 22,500 psi (1,550 bar) or rated to 30,000 psi (2,070 bar). All pressure containing components are made from annealed 316 stainless steel material in compliance with NACE MR0175.

These needle valves with metal to metal seats have a high level of safety and reliability under harsh operating conditions. These valves may be used both with gases and liquids.

Traceability is ensured through extensively documented data (batch number, maximum pressure, material number, type designation). All Sour Gas components are supplied with collars and glands unless otherwise specified.


High Pressure Fittings for Sour Gas Applications

High Pressure Fittings for Sour Gas Applications 30000 psi, 2070 bar, Elbow, Tee, Cross, striaght coupling, Union Couplings, Boulkhead CouplingsMaximator Sour Gas Fittings are designed for oil and gas services where H2S is present.

All pressure containing components are made from annealed 316 stainless steel material in compliance with NACE MR0175.

All High Pressure fittings are supplied with collars and glands. Mounting holes are standard on all elbows, tees, and crosses.


High Pressure Tubing and Coned and Threaded Nipples for Sour Gas Applications

High Pressure Tubes for Sour Gas Applications up to 30000 psi (2070 bar)Maximator Sour Gas Tubing is designed for oil and gas services where H2S is present. All tubing is seamless annealed 316 stainless steel material in compliance with NACE MR0175.

This tubing is made under strict manufacturing and quality control standards and inspections, with dimensional tolerances to match the requirements of the high pressure coned and threaded connections.

High Pressure Nipples for Sour Gas Applications 30000 psi, 2070 bar, cones and threaded ends for High Pressure ConnectionsMaximator offers a line of coned and threaded high pressure tube nipples in a variety of lengths for all standard tube sizes.

The coned and threaded high pressure tube nipples are available in annealed 316 stainless steel. Special length coned and threaded nipples are available upon request. Consult MAXIMATOR for availability and price.


Check Valves for Sour Gas Applications

Non-Return Valves, Check valves for sour gas applications 30000psi, 2070 bar, O-Ring Check Valves, Ball Check ValvesMaximator o-ring check valves provide high quality directional flow control and bubble tight shutoff for liquids and gases. These check valves are not to be used as a relief device. The opening pressure of the O-Ring Check Valves is approx. 10 psi (1.5 bar).

Materials:
Body, cover, poppet, cover gland: annealed 316 stainless steel
Spring: Inconel X-750
O-ring: Viton “A” (-4°F to 392°F)

Maximator ball check valves prevent reverse flow where bubble tight shutoff is not mandatory. These check valves are designed to operate to 660°F. These check valves are not to be used as a relief device. The opening pressure of the Ball Check Valves is approx. 10 psi (1.5 bar).

Materials:
Body, cover, poppet, cover gland: annealed 316 stainless steel
Ball: annealed 316 stainless steel
Spring: Inconel X-750


Line Filters for Sour Gas Applications

Line filters for Sour Gas Applications 30000 psi, 2070 bar, Dual-Disc line Filter and Cup Type Filter DesignMaximator dual-disc line filters are used to filter process fluids in high pressure systems. This design helps remove the large particles first through a coarse primary disc, which then allows a secondary disc to provide a smaller micron filtration.

These filter elements are designed to withstand pressure surges without cracking, flaking, or rupturing. Filter elements come standard in the following micron sizes: 5/8, 8/30, 30/56 (secondary/primary). Filters are rated for temperatures -60˚F to 660˚F (-50°C to 350°C). All line filters come with glands and collars.

Materials:
Body, cover, cover gland: annealed 316 series stainless steel
Element: 300 series stainless steel

Maximator cup-type line filters are used when maximum filtration surface area and a single micron size element is preferred. This design increases the filter area as much as 6 times the area of the disc type filter, and will permit higher flow rates with a lower pressure drop, and longer intervals between element changes. Filter elements come standard in 5, 30, or 56 micron sizes and are easily replaced. Filters are rated for temperatures -60˚F to 660˚F (-50°C to 350°C). All line filters come with glands and collars.

Materials:
Body, cover, cover gland: annealed 316 series stainless steel
Element: 300 series stainless steel


Sour Gas Adapters and Couplings

High Pressure Adapter and high pressure couplings for sour gas applications 30000psi, 2070 bar, male-male, male-female, female-femaleMaximator sour gas adapters and couplings are designed to join a variety of pressure connections where H2S ist present.

All adapters are made of annealed 316 stainless steel material that meets NACE MR0175 specification.

­
Maximator Valves Fittings Tubing
VFT Catalogue 2021 Language: English

­

Find your product now in our new webshop

You can now access detailed product information and data sheets in our new ePortal

to the ePortal

Latest catalogues and flyers

­

Maximator High Pressure Pumps

3999.0467, Language: English, Release: 02/2024

To the catalogue

­

Maximator Gas Booster and Air Amplifier

3999.0316 | Language: English | Release: 05/2021

To the catalogue

­

Maximator Valves Fittings Tubing

VFT Catalogue 2021 Language: English

To the catalogue

­

HYDRO HULC - The first modular Hydrogen Compressor of its kind up to 1,050 bar

A modular gas compressor specially developed for compressing hydrogen | Language: English | Release: 04/2024

To the catalogue

­

GFS-X-Tower - High Efficient Hydrogen Compressor Systems up to 900 bar - Plug & Boost

GFS / GFX Series Systems are standalone Gas Filling Systems for small scale hydrogen applications | The Maximator X-TOWER is a modular Gas Compression System, specifically designed for Hydrogen compression up to 900 bar with scalable volume flow | Language: English | Release 10/2024

To the catalogue

­

Maximator H2-Components.pdf

Components for hydrogen service

To the catalogue

­

Maximator-Rental-Units-EN082014.pdf

To the catalogue

­

102022_Maximator_LGP-Series-Katalog-EN.pdf

To the catalogue

­

Maximator Gas-and-Water-Injection-Technology-01-2015.pdf

To the catalogue
­

Contact us

­ +49 3631 9533-0

­ ed.rotamixam(ta)ofni

Cookie Settings

We use cookies to improve your experience and to provide you with personalized content. By using this website you agree to our cookie policy

Necessary Cookies
Statistical Cookies
Accept Change Settings
www.maximator.de

Cookie Settings

More information on how we use cookies in our cookie policy.

­

Necessary Cookies

Without these Cookies services you have asked for cannot be provided.

Statistical Cookies

Allow anonymous usage statistics so that we can improve our offering.

Cookies We use on This Site