MAXIMATOR power packs for oil, water or aggressive media are complete hydraulic units ready for connection which are provided for generating operating pressures up to 5,500 bar (79,750 psi).The hydraulic systems can be used for all kinds of testing, bolt tensioning and clamping or for other functions requiring a determined pressure.
High pressure homogenizers are used for many applications in the biotechnology, pharmaceutical, cosmetic, food, and environmental industries, where it is necessary to reach particle sizes in a nano range.
High pressure homogenizers are used for many applications in the biotechnology, pharmaceutical, cosmetic, food, and environmental industries, where it is necessary to reach particle sizes in a nano range.
MAXIMATOR power packs for oil, water or aggressive media are complete hydraulic units ready for connection which are provided for generating operating pressures up to 5,500 bar. The hydraulic systems can be used for all kinds of testing, bolt tensioning and clamping or for other functions requiring a determined pressure.
The pressure will be generated by means of a pneumatically operated MAXIMATOR pump. The pump will be connected to the existing industrial compressed-air ductwork system. For generating the pressure, an electric connection will not be necessary.
MAXIMATOR power packs can be equipped with all MAXIMATOR pumps. Restrictions result only from determined structural dimensions as well as from the flow rates of the pumps being necessary for the respective function.
For the simple commissioning and unproblematic application, MAXIMATOR power packs will be equipped with all required components. Part of them is an air control unit with combined filter and water seperator, a pressure-regulating valve, a pressure control gauge as well as a manual shut-off valve for stopping off the drive air pressure.
For all applications within the range of the oil hydraulic, the pumps will be mounted in the oil tank in a compact and space saving manner. In case of operation with water or with aggressive media, the pump will be mounted on the tank. According to standard, there can be selected among tank capacities from 6.5 l to 70 l. Larger-sized tanks are available on demand.
On request, the tanks can be provided with carrying handles or on wheels (to be recommended for all G-type pumps as well as for tank capacities from 30 l).
On the high-pressure side, the power pack will be equipped with a pressure relief valve (expansion valve) as well as with a manifold block with one or several pressure outlets for connecting the test pieces (which can be shut off separately or completely on request).
For indicating and monitoring the operating pressure, liquid-damped pressure gauges of the accuracy class 1.0 or 1.6 (higher accuracies are possible on demand) can be delivered in different sizes for pressures up to 7,000 bar.
With the above specified scope of supply, the MAXIMATOR power pack is ready for connection. For operating the hydraulic unit, only the drive air piping has to be connected and the tank has to be filled with the provided operating liquid.
MAXIMATOR offers an extensive volume of accessories for all cases of application. Part of them are pressure switches, float valves and pneumatically or electrically operated directional valves for actuating cylinders. Connecting adaptors, quick couplings, pressure filters, high-pressure hoses as well as shut-off valves and control valves are available too.
We design the MAXIMATOR power packs according to your requirements. Our sales engineers in the engineering departments as well as our co-workers in the Works Nordhausen are pleased to give you expert advice and will recommend you the respective power pack being suitable for your special case of application.
Components in Modular Design:
Pump model:
Air control unit:
comprising combined filter pressure regulator, control pressure gauge and shut-off valve
Air safety valve:
SV mounted in the air line
Tank sizes:
Standard of aluminium, stainless steel on request.
Note: MAXIMATOR pumps MO and S series are integrated in the tank.
All other pump series will be mounted on top of the tank.
Mobility of the packaged pump system:
Relief valve:
EV with return line to the tank
Pressure gauge:
Pressure range / Diameter of the housing (cl. 1.6/1.0/0.6, glycerine damped)
Operating liquid:
Manifold block with pressure outlet(s):
V Option: Shut-off valve for pressure outlet (AV1-AV6)
Hand lever:
H only available for M22 to M189, single acting, single stage
Other options:
Specials on request
Coding example:
M 189-01 / C1 / SV / 13 / F / EV / 0-1600 (160) / W / A2 / H / SCHL
Power pack with pump type M189-01 with hand lever, air control unit "C1", air safety valve, aluminium tank, volume 13 liter, on wheels, manually relief valve EV, pressure gauge 0-1,600 bar, Ø 160 mm, suitable for water service, manifold block with two pressure outlets, 2 pces. hoses.
The movable and portable MAXIMATOR hydraulic power packs can be used wherever hydraulic pressures are required. They are to be found for example in the steel construction, boiler construction, tank construction and reactor construction as well as in yards, smelting plants, machine factories and locksmith's shops. For years they have proved themselves in inspection and acceptance processes as well as in the hydraulic working and clamping systems.
The power packs are also provided for actuating hydraulic punches and punch systems. Among others they will be used in aircraft yards for lifting aircrafts, for clamping large-sized devices, for checking pressure vessels and pressure systems.
In the tool hydraulic, MAXIMATOR units will be used for pressure oil junctions as well for mounting and pulling-off large-sized toothed gears.
Furthermore, the systems will be used in hydraulic presses, among others also when high pressure must be maintained for a long time, such as in case of tire and vulcanizing presses as well as for presses overload protections. For such purposes, the hydraulic unit can be delivered with reversing devices permitting an one-sided or also twosided admission to the press. Direct admission of compressed air to the return side enables a connection for the quick return. The hydraulic units have also proved to be an outstanding solution for isostatic pressing procedures.
For realizing regular pressure tests (TÜV) at pressure vessels, MAXIMATOR offers the complete solution with regard to the pressure generation. These power packs will always be set up upon customer's request.
The required hydraulic pressure will be generated by means of air-lift pump. In this connection, the hydraulic pressure corresponds to the set air pressure multiplied by the transmission ratio of the pump. When the appliance reaches the pre-set pressure, it stops automatically and maintains the pressure until arising a pressure drop caused through leakage or the like. The appliance starts automatically and functions again until having reached the pre-set pressure.
All the controlling and regulating processes are of unsurpassed simplicity because of the compressed-air drive. So, the complete appliance is very robust, operationally reliable and insensitive to hardest operating stresses. The power pack will not be damaged through moist rooms, dust or higher temperatures. The MAXIMATOR hydraulic units are explosion-proof because no electric energy is required.
Advantages of the MAXIMATOR power packs
You can now access detailed product information and data sheets in our new ePortal
to the ePortal
3999.0316 | Language: English | Release: 05/2021
To the catalogue
A modular gas compressor specially developed for compressing hydrogen | Language: English | Release: 04/2024
To the catalogue
GFS / GFX Series Systems are standalone Gas Filling Systems for small scale hydrogen applications | The Maximator X-TOWER is a modular Gas Compression System, specifically designed for Hydrogen compression up to 900 bar with scalable volume flow | Language: English | Release 10/2024
To the catalogue
+49 3631 9533-0
ed.rotamixam(ta)ofniWe use cookies to improve your experience and to provide you with personalized content. By using this website you agree to our cookie policy
More information on how we use cookies in our cookie policy.
Without these Cookies services you have asked for cannot be provided.
Allow anonymous usage statistics so that we can improve our offering.
Consent-Module
Consent-Module
Consent-Module
System Cookie
This website uses "fonts.com", a font service provided by Linotype GmbH ("fonts.com"), Werner-Reimers-Strasse 2-4, 61352 Bad Homburg ("fonts.com"). Each time this website is accessed, files are loaded from a "fonts.com" server to display the texts in a specific font. Your IP address can be transferred to a server of "fonts.com" and saved in the context of the usual weblog. Further processing of this information is the responsibility of "fonts.com", the corresponding conditions and setting options can be found in the data protection information of "fonts.com". https://www.fonts.com/info/legal
This is a collection of fonts for commercial and personal use.
Verarbeitungsunternehmen
Google Ireland Limited
Google Building Gordon House, 4 Barrow St, Dublin, D04 E5W5, Ireland
Data Purposes
Data Attributes
Data Collected
This list represents all (personal) data that is collected by or through the use of this service.
Legal Basis
In the following the legal basis for the processing of personal data required by Art. 6 I 1 GDPR is listed.
Art. 6 (1) (a) GDPR
Location of Processing
European Union
Retention Period
Data will be deleted as soon as they are no longer needed for the processing purposes.
Further Information and Opt-Out
Click here to opt out from this processor across all domains https://safety.google/privacy/privacy-controls/
Click here to read the privacy policy of the data processor https://policies.google.com/privacy?hl=en
Cookie Policy URL https://policies.google.com/technologies/cookies?hl=en
Session ID Flycms
This is an open source web analytics service.
Processing company
Matomo org.
150 Willis St, 6011 Wellington, New Zealand
Data Purposes
Technologies Used
Data Collected
This list represents all (personal) data that is collected by or through the use of this service.
Legal Basis
In the following the legal basis for the processing of personal data required by Art. 6 I 1 GDPR is listed.
Art. 6 (1) (a) GDPR
Location of Processing
European Union
Retention Period
The data will be deleted as soon as they are no longer needed for the processing purposes.
Data Protection Officer of Processing Company
Below you can find the email address of the data protection officer of the processing company.
privacy@matomo.org
Further Information and Opt-Out
Click here to opt out from this processor across all domains https://matomo.org/privacy-policy/#optout
Click here to read the privacy policy of the data processor https://matomo.org/privacy-policy/
Cookie Policy URL https://matomo.org/privacy-policy/